Grabber Winner Series Rack System
Grabber Winner Series Rack System
Click picture above to
view larger version
Grabber Winner Series Rack System
Grabber PaceSetter Rack System
Grabber Winner Series Rack System
Grabber G-Force Series Rack System
Grabber Truck System

Grabber Rack System

NOT ALL RACKS ARE CREATED EQUAL

Tough enough to handle all the traffic from full frames to long bed trucks - even dualies. The ProLine Series gives body shops the most rugged, powerful rack system in the market today.

Proline’s 6" deck boasts a ½” top plate engineered stronger to stand up to any pull. Our flat, even deck surface provides hassle free set up of system accessories and allows measuring with ease.

• Consistent Quality
• Stronger Equipment
• Maximum Performance Pull After Pull
Tie downs install from top of deck for fast and easy set up.
Removable cross member on
each end provides technicians
with under vehicle access.
Height adjustable clamping system securely anchors and pinchweld heads adapts to most specialty vehicles.
Unique bearing design
allows towers to glide
smoothly 360° around
platform.
Angled tower pins
allow for fast and easy
tower positioning.

ONE CYLINDER DOES IT ALL!
The single cylinder on ProLine’s
XL model provides power for
BOTH the tilt and level lift
featuring eight working heights.


FEATURES:  

  • Two 10-Ton air/hydraulic towers
  • 25-ton, single cylinder on the XL model operates both tilt & level lift
  • Full range of working positions from 17” to 40” accommodates most vehicles
  • Level lift with automatic safety lock (air operated) for technician safety
  • Down pull assembly makes down pulls easier than before
  • Tie down assemblies for added holding options
  • 3-Bag air jack for additional lift
  • Double pull block boosts pulling power & allows multi-pull capability
  • OPTIONAL UPGRADE
    Electric hydraulics with hand-held control

  • Two 10-Ton air/hydraulic towers
  • 20-tons of pulling power
  • Tilt bed for easy loading
  • Comfortable 20” working height
  • Pumps rest in tower trays for neat storage off floor
  • Obstruction-free work zone beneath rack

SPECIFICATIONS:
Platform Length   18’ L x 90" W 20’ L x 90" W 22’ L x 90” W
Lifting Capacity 10,000 lb 10,000 lb. 10,000 lb
Treadway Width(mm) 29” (736.60 mm) 29” (736.60 mm) 29” (736.60 mm)
Center Opening 32” (812.80mm). 32” (812.80mm) 32” (812.80mm)
Width with Towers on Each Side 12’ 6” (3479 mm). 12’ 6” (3479 mm) 12’ 6” (3479 mm)
Length with Towers on Each End 23’ (6705.60mm) 25’ (7315.20mm) 27’ (8229.60 mm)
Length with Ramps 21’ (6400.80 mm). 23’ (7010.40 mm) 25’ (7620 mm)
Tower Height From Top of Platform 75” (1905 mm) 75” (1905 mm) 75” (1905 mm)
Maximum Pull Height 65” (1651 mm) 65” .(1651 mm). 65” (1651 mm)
Hydraulics 10-Ton 10-Ton 10-Ton
Power Supply / U.S. (Electric Hydraulics) 115V 115V 115V
WORKING HEIGHT      
ProLine (Fixed Working Height) 20” 20” 20”
ProLine XL (8 Working Heights) 17"-40" 17"-40" 17"-40"
View Pro Line Series Brochure >