Grabber's 10-U System delivers enhanced productivity and profits without the larger investment or floor space needed for racks.

For smaller shops, the 10-U System can stand alone as the primary repair station. For larger shops, multiple 10-U installations can dramatically increase repair capacity and labor productivity. Since the 10-U towers and system components work well with other Grabber (and many competitor’s floor systems), multi-stall coverage has never been easier or more affordable.

G-94 Collapsible Unibody Clamps

Four collapsible unibody clamps attach to floor mounted center tracks. With drive-over clamps in the down position, vehicle loading is quick and easy. Clamps can then be raised and locked into position to easily accommodate the width and length of virtually any vehicle's pinchweld configuration.

Downloads

G-94 Installation Manual (pdf)

Adjusta-Bench-System

Adjustable clamps attach to center tracks. Can be used to upgrade any floor system by providing chainless unibody anchoring. (Set of four)

Downloads

Adjusta-Bench Installation Manual (pdf)

Standard Components

#1020CC (G-94 Clamp)
#1020AB (Adjusta-Bench System)

(1) 12’ x 20’ Outer Rectangular Track (floor mounted)
(1) Anchor Kit (consisting of 108 Bolts)
(1) G94 10-Ton Pull Tower  -OR-  (1) Versa 10-Ton Pull Tower
(1) Air/Hydraulic Pump w/Hose
(1) 3/8” x 10’ Heavy Duty Chain w/Slip Hook
(2) Outer Track Anchors
(1) Anchoring System - Choose either the G-94 Collapsible Clamps or the Adjusta Bench Anchoring stands with the 10-U System.

*Installation tool for setting anchor bolts available for rent

Grabber's System 90 represents the ultimate full service repair system, taking the best from floor track, rack and bench technologies while conserving a shop's two most valuable commodities - floor space and time. System 90 can be the high-performance profit center for any shop.

Multiple System 90 installations can be custom configured to work side-by-side with other Grabber floor track systems sharing track sections, portable pull towers and system accessories for the ultimate in cost efficient multi-stall coverage.

Features

• Outer Track (embedded or floor-mounted) provides 360° perimeter pulling.
• Adjusta-Bench System provides four floor-mounted stands for chainless vehicle anchoring.
• Two Pull-Towers, 5-Ton and 10-Ton models with swivel bases, can work independently or in tandem for multiple, simultaneous pulls.
• Hydraulic Two Post, In-Ground Lift provides full undercarriage access during estimating and allows the technician to work at a comfortable height (up to 72" from floor level) while measuring tasks and mechanical or body work is being performed.

Standard Components

#1050

(1) G94 5 ton Pull Tower
(1) G94 10 ton Pull Tower
(2) Air/Hydraulic Pumps with Hose
(1) 12’ x 20’ In-Floor Track
(2) 44” Center Tracks
(1) 5/16” x 10’ Heavy Duty Chain with Slip Hook
(1) 3/8” x 10’ Heavy Duty Chain with Slip Hook
(2) Outer Track Anchors
(1) Adjusta Bench Stands (set of 4)
(1) Two post in-ground lift with lift form and bolster package